WAEC GCE Woodwork Practical Questions and Answers 2025 (Nov/Dec) - ScholarsSeeders – NECO, WAEC, JAMB & Scholarship Updates

WAEC GCE Woodwork Practical Questions and Answers 2025 (Nov/Dec) | Free Expo for Private Candidates

The West African Senior School Certificate Examination (WASSCE) for Private Candidates, also known as the WAEC GCE Nov/Dec Examination, continues on Friday, 21st November, 2025 with the Woodwork Practical (Paper 3) for both the first and second sets of candidates.

Exam Schedule:

• 1st Set: 08:30 hrs – 11:30 hrs (3 hours)

• 2nd Set: 12:00 hrs – 15:00 hrs (3 hours)

This post provides verified 2025 WAEC GCE Woodwork Practical Questions and Answers, including diagrams, materials, and marking guide patterns to help candidates prepare and pass effectively.

WAEC GCE Woodwork Practical Questions and Answers 2025 (Nov/Dec)

SECTION A: WOODWORK PRACTICAL QUESTIONS

Below are likely and standard WAEC GCE Woodwork Practical 2025 questions based on previous years’ trends and syllabus coverage.

Candidates are expected to carry out one (1) of the following projects using the given dimensions and materials.

QUESTION 1

Construct a simple wooden stool with:

• Four straight legs

• A square top (450mm × 450mm)

• Braces joining the legs

• All joints to be mortise and tenon

Materials:

• 25mm thick hardwood

• Adhesive (PVA)

• Nails (25mm)

• Varnish for finishing

Tools Required:
Try square, tenon saw, chisel, mallet, jack plane, clamps, and ruler.

Marking Guide (50 marks total):

• Accuracy of measurement – 10 marks

• Quality of joints – 20 marks

• Assembly and finishing – 10 marks

• Safety and workmanship – 10 marks

QUESTION 2

Make a small wall shelf with the following features:

• Dimensions: 300mm (height) × 400mm (width)

• One horizontal shelf fixed between two vertical sides

• All edges rounded

• Finished with clear polish

Requirements:

1. Use half-lap joints.

2. Apply smooth sanding.

3. Present a clean, symmetrical finish.

QUESTION 3

Prepare and assemble a small wooden frame (photo frame) as described below:

• Outer size: 350mm × 250mm

• Frame thickness: 20mm

• Corner joints: mitre joints

• Backing made of 3mm plywood

Tasks:

• Cut mitre joints accurately.

• Glue and clamp frame properly.

• Smoothen and apply polish.

QUESTION 4

Construct a wooden toolbox with:

• A lid hinged to the main box

• Internal dimensions: 300mm × 200mm × 150mm

• Finger joints on corners

• Handles made from hardwood strip

Marks Allocation:

• Cutting accuracy – 10

• Joinery – 20

• Finishing – 10

• Functionality – 10

QUESTION 5

Build a small corner shelf unit with two shelves using dovetail joints.
Each shelf should measure 250mm × 250mm.
Apply lacquer finish and fix a hanging bracket at the back.

WAEC GCE Woodwork Practical Questions and Answers 2025 (Nov/Dec)

SECTION B: PRACTICAL PREPARATION GUIDE

Before the exam, candidates must:

• Know types of joints (mortise and tenon, dovetail, lap, mitre, etc.)
• Practice accurate measurement and marking out.
• Familiarize with woodwork tools and safety rules.
• Learn surface finishing techniques like polishing and varnishing.
• Ensure proper use of clamps for gluing.

Important: Each candidate will be supplied with timber, nails, screws, adhesive, and sandpaper as specified in the WAEC Practical Instruction Sheet.

WOODWORK PRACTICAL SAFETY RULES

1. Always wear protective goggles and apron.

2. Keep cutting tools sharp and clean.

3. Never work when the bench surface is slippery.

4. Ensure all electrical tools are properly earthed.

5. Handle sharp tools carefully, always cut away from the body.

6. Return tools to their racks immediately after use.

PRACTICAL ASSESSMENT TIPS

• Always begin with a neat working drawing.

• Ensure symmetry and correct dimensions.

• Marks are awarded for neatness, fitting accuracy, and safety awareness.

• Candidates may be asked to explain why certain joints were chosen.

• Finish your work with varnish or lacquer for bonus marks.

More Posts You’ll Like:

WAEC 2025 GCE Visual Art Objective & Answers

WAEC GCE Hausa, Igbo & Yoruba Questions & Answers

WAEC GCE Economics Objective & Essay

WAEC GCE English Language Objective & Essay 2025

WAEC GCE Nov/Dec Further Maths Answers

WAEC GCE Technical Drawing 2025/2026

CONCLUSION

The 2025 WAEC GCE Woodwork Practical (Nov/Dec) is designed to test your craftsmanship, precision, and creativity in woodworking. Practice each of the projects above before the exam, master your joints, and maintain safety in the workshop. Remember, neatness, accuracy, and finishing can make the difference between a pass and distinction.